Lifts
Vertical Boat Lifts
FLOE vertical boat lifts for runabouts, fishing boats and surf boats. Extruded bunk rails adjust in 1/16", not in 3". Ten lakes served.
5.0Google Reviews Read all Google reviews
The adjustment is the argument. Because the bunk rail is extruded aluminum rather than square tube with holes drilled in it, we adjust in 1/16″. ShoreStation, DAKA and Porta-Dock drill holes, so their adjustment lands every 3″. On a boat you’re setting down a thousand times, 3″ isn’t a rounding error. FLOE builds these as the V-series for manual and 12V, and the VSD range where the vertical screw drive does the work. If the boat is a wake or surf boat, the sizing is a different conversation and it has its own page: wake boat lifts.
At a glance
Before you order. These come up on almost every order. Answered here so you can skip the call.
- Winch driven models
- V-1600, V-2000, V-2602, V-3000, V-3600 and V-4600, rated 1,600 to 4,600 lb
- Screw drive models
- VSD 3800, VSD 5000, VSD 6500, VSD 8000 and VSD 10000, up to 10,000 lb
- Screw drive rating
- FLOE rates the ball-screw for 20,000 cycles at 10,000 lb. The ball nut travels the screw and pulls the lifting cable, so a VSD is a screw driving a cable rather than a screw carrying the boat
- Power
- 36" crank or 12V DC on the smaller V-series, 42" crank or 12V DC from the V-3000 up, 24V on the VSD
- Bed travel
- 50 to 56" depending on model
- Leg travel
- 24" on the V-1600, 30" through the V-4600 and the VSD 5000, 35" on the VSD 6500 and larger
- Frame weight
- 155 lb on the V-1600 up to 1,010 lb on the VSD 10000. The 10000 Standard is 796 lb, lighter because it is the narrower frame rather than a smaller lift. Both tens are rated 10,000 lb.
- Frame width
- One frame across the VSD 6500, 8000 and 10000 Standard: 135″ outside, 116″ inside. The VSD 10000 Wide is the wide beam model at 147″ outside and 131″ inside. Guide-ins do not take the same widths across all four: the 6500, 8000 and 10000 Standard run 103.5″ to 107″ inside depending on the system, and the Wide runs 115.5″ to 120″.
- Leg adjustment
- Easy-Level™ on every model except the V-1600, which uses a manual set-bolt system. FLOE states this exception; it is the lift most PWC owners buy
- Water depth
- About 6.5 feet without leg extensions and about 8 feet with. Optimum 26 to 66"
- Deep Water Leg Kits
- Add 48" with 30" of adjustment, for an optimum of 74 to 114". Deep water legs plus a canopy requires four anchors
- Cradle beam
- Lowers to 9.5" from the bottom on the vertical models, 8.5" on the V-1600
- Frame construction
- Bolt together, with no structural welds
- Bunks
- Full-Length Bunks in aluminum extrusion with interlocked vinyl, or Cradle Pad Pivot Bunks sold in pairs, two pairs recommended on most installations
- Sizing rule
- FLOE asks that total loaded weight stays under 85 percent of rated capacity
- Guide-ins
- Pro-Park, Precision Park, Perfect Park™ and Motor Stop, depending on model
- Warranty
- 15 year limited, which is FLOE's own term for it
Who this is for
Right for
Any V hull boat, from a small fishing boat up to a heavy surf boat. The extruded bunk rail takes a bolt anywhere along it, so we set the boat exactly where it should sit rather than close to it.
Not right for
Pontoons and tritoons. Those sit on a flat bunk system across the tubes, which is a different lift, and it’s on the pontoon page.
How it goes in here
Depth is the first question we ask, and on White Bear the answer changes street by street. Some addresses need leg extensions because it’s too deep off the end of the dock, and others need a shallow operating lift, and we know which from the address before we load a trailer. Forest Lake runs the other way: three basins, hard sand, and the lift often sitting at the end of 200 feet of dock, which is where the surf boats on 8,000 pound lifts with Perfect Park™ guidance and a MAXIS canopy live. On Lake Owasso the barge reaches shore on every job, which is unique in our territory and cuts the hours out of an install. Lifts are built and accessorized in our Forest Lake shop before they go on a trailer. The Easy-Level™ leg at each corner and the ball screw want grease once a season. Most owners do that themselves, and we will do it as an annual service on request for a fee.

Questions we get asked about vertical boat lifts
What size lift do I need for my boat?
Size it on the loaded weight, not the dry weight on the brochure. FLOE asks that the total stays under 85 percent of the rated capacity, so weigh the boat the way you actually use it and add about 20 percent on top. This is the thing customers get wrong sizing a lift themselves. Fuel, batteries, ballast, coolers, water toys and people are all in the boat when the lift picks it up.
How deep does the water need to be?
Optimum for most FLOE lifts is 26 to 66". Past that, a lift handles about 6.5 feet without leg extensions and about 8 feet with them, and a Deep Water Leg Kit adds 48" for an optimum of 74 to 114". A lift on deep water legs carrying a canopy needs four anchors. On White Bear the right answer changes street by street.
Why does FLOE adjust in sixteenths and other brands in threes?
Because the bunk rail is extruded aluminum with a bolt that clamps anywhere along it, not square tube with holes drilled through it. ShoreStation, DAKA and Porta-Dock drill holes, so their adjustment lands every 3". Extrusion is also about 50 percent stronger than standard square tube, and it’s what lets the rubber be engineered into the extrusion itself on boat and pontoon bunks.
How long do the cables and pulleys last?
On FLOE hardware, closer to 20 years. FLOE fits aluminum pulleys and stainless cable. Much of the market fits plastic pulleys and galvanized cable, and we see Beach King owners replacing both at around 4 years. Spend a little more at the front and the long run maintenance cost is a lot less. Never grease a cable. Penetrating oil is the right answer, and heavy rust means replace it now.
Manual crank, 12V or the screw drive, which do I want?
The V-series takes either a manual crank, 36" on the smaller models and 42" from the V-3000 up, or a 12V DC winch. The VSD range replaces the winch with a vertical screw drive running on 24V, which FLOE calls exclusive rather than patented. The wireless remote reaches up to 300 feet. Boat weight and how often you go out decide it.
What’s the warranty, really?
15 years limited, and Blake will tell you 15 is fairly standard in this market. What matters is inside it. Two years is full parts and labor and it’s parts only after that. The aluminum structure is 100 percent parts through year ten and prorated years eleven to fifteen. Canopy fabric, winches, cables, ball screws, solar panels and wireless are 5 year prorated. Original purchaser, private use, labor covered within 40 miles.
What maintenance does a lift need?
Grease at the Easy-Level™ leg on each corner and at the ball screw, once a season. That is the whole list, and a new lift arrives already greased and torqued to FLOE spec, so the first one is not due for a year. Most owners do it themselves and FLOE publishes a video for each half of the job. We offer it as an annual service for a fee if you ask. The one exception is the V-1600: FLOE builds that model with a manual set-bolt leg rather than Easy-Level™, so there is no leg to grease and the ball screw is the whole job. Never work under a loaded lift: take the boat off and lower the bed completely first. The warranty is void on winches and drive trains that have been submersed.
What’s the most common repair you do on a FLOE lift?
An Easy-Level™ leg, and it’s nearly always caused by the same two things. Either an impact wrench was used where a screw gun belongs, or a leg was torqued hard while it was stuck in muck or clay. It’s the number one FLOE service call we take, on lifts and on docks alike. Use a drill in clutch mode and stay under 15 foot-pounds.
Will a lift protect my boat in a storm?
It helps, and it isn’t a guarantee, so here’s what actually happened. In June 2026 a pontoon went over on its lift on White Bear and the dock beside it was pulled away from shore. Two pontoons were totaled that day, one on White Bear and one on Clear Lake, both upside down and full of water. Both owners replaced the boat and both bought another FLOE lift.
What this costs
Price depends on how far out you have to go, what the bottom is doing under it and what you are putting on it. Give us the address and we will put a real number on it rather than a range that turns out to be wrong.
Every FLOE dock and lift carries a 15 year limited warranty: 2 years parts and labor, then parts only. What is inside that, and the four things that quietly void it, are set out in full.
FLOE boat lifts run $4,000 to $30,000 and up. Those are base lifts: the band prices the lift itself, and a canopy, a powered drive or guide-ins move it up from there. Personal watercraft lifts start lower; high capacity vertical and screw drive (VSD) lifts with canopies and upgrades reach the upper end. Where a vertical lift lands is decided by capacity and by what goes on top of it. A canopy, a powered drive and guide-ins each move it, and a lift sized for a 22 ft boat is a different number from one sized for a wakeboat. FLOE's worked example for a 22 ft boat is $7,000 to $12,000 and up, and that covers the frame, a motorized winch, bunks and guide-ins. These ranges reflect common residential installations. Your final price depends on layout, boat size, shoreline conditions and installation requirements.
Get this quoted for your shoreline Design it in the lift builder Lift and dock accessories
Compare it against the alternatives
Already have a dock in the water? Book spring installation or fall removal, or see everything we do from ice out to November.
